← Back to Blog

Last updated: 11 November 2026

Silver Plate vs Sterling Silver: How UK Resellers Tell Them Apart

The short answer: sterling silver is solid silver, at least 925 parts per thousand, all the way through. Silver plate is base metal with a thin coat of silver on the surface. In the UK, silver items of 7.78 g and over must carry a hallmark from an assay office before they are sold as silver. Plate carries maker’s stamps such as EPNS, EP or A1, which are not hallmarks.

Those marks are the fastest and most reliable check at a car boot or charity shop. The home tests that resellers use — magnet, wear, weight, tarnish — only help you rule things out. Below is what each mark means, what each test can and cannot tell you, and why the difference matters so much for price. To read a hallmark step by step, use our free UK silver hallmark identifier.


Sterling and Britannia silver: what the law says

Under the Hallmarking Act 1973, Schedule 1, “sterling” means a standard of fineness of 925, and “Britannia” means 958.4. In plain terms, sterling is 92.5% silver and Britannia is 95.8% silver. The Silver Society explains that pure silver is too soft for objects in daily use, so it is alloyed with another metal.

The Birmingham Assay Office lists four silver standards it hallmarks today: 800, 925 (sterling), 958 (Britannia) and 999 (fine silver). Britannia is still a legal standard. It has a history too: the V&A dates Britannia Standard silverware in England to 30 May 1697 – 1 June 1720. After 1720, silversmiths could choose either standard.

What a UK hallmark contains

According to the Sheffield Assay Office, three marks are compulsory:

  • Sponsor’s mark — who sent the item for hallmarking (the maker or retailer).
  • Fineness mark — the metal content in parts per thousand, for example 925.
  • Assay office mark — which office tested it. The Silver Society lists Birmingham’s anchor, Sheffield’s crown (later a Yorkshire rose — see our hallmark identifier) and Edinburgh’s three-towered castle among the town marks.

The lion passant (for 925), the Britannia figure (for 958) and the date letter are voluntary extras today. You will see them on most older pieces, and they are what our hallmark tool walks you through.

The 7.78 g rule

Silver articles under 7.78 g do not need a hallmark (Schedule 1, Part II, para 12A). Above that weight, an item sold as silver in the UK must be hallmarked. The London Assay Office dealer’s notice (2025) states the same 7.78 g threshold. This matters for small items: a light ring, chain or pair of earrings can be real silver with only “925” on it, or with no mark at all.


What EPNS, EP, A1 and other plate marks mean

EPNS means Electro Plated Nickel Silver. The Birmingham Assay Office says that marks such as EPNS, EPBM or Silver Plate indicate a silver-plated item rather than solid silver. “Nickel silver” is a trap word. It is an alloy of copper, nickel and zinc, also called German silver or alpacca, and it does not contain silver. The V&A describes German silver the same way: an alloy of copper, zinc and nickel.

The marks you will see on plate:

  • EPNS — electroplated nickel silver. The most common plate mark, according to The Silver Society.
  • EP — electroplate. Collectors on r/Silverbugs sum it up simply: the lion means sterling, EP means electroplate (thread).
  • EPBM — another plate mark on the Birmingham Assay Office list.
  • A1 — collectors report this is a grade of plating, not a purity mark. One r/Silverbugs reply reads a stamp as “30 microns of A1 EPNS” (thread).
  • “Silver plate”, “plated” — plain English, and the only way a UK trader may describe it. The Act allows the word “silver” on a plated item only if it is qualified by “plated”, in lettering at least as large (Schedule 1, Part I).

Pseudo-hallmarks

This is where most mistakes happen. The Silver Society notes that plate makers often applied marks that simulated hallmarks, with letters placed in shields to look like a genuine set. Electroplating started in Birmingham around 1840, so Victorian plate can carry convincing-looking symbols. Collectors report fakes with a crude lion, a wrong-looking anchor and copper showing at the worn edge just below the marks (thread). A real UK hallmark has a sponsor’s mark, a fineness mark and a town mark you can match; if one is missing or odd, treat the piece as plate until proven otherwise.


UK hallmarks vs plate marks at a glance

Type What it is Typical marks Scrap value
Sterling silver 925 parts per thousand silver, solid Sponsor’s mark + 925 and/or lion passant + town mark (+ date letter) Yes — weight × 0.925
Britannia silver 958.4 parts per thousand silver, solid Sponsor’s mark + 958 and/or Britannia figure + town mark Yes — weight × 0.958
Electroplate (EPNS, EP, EPBM) Base metal with a thin silver surface EPNS, EP, EPBM, A1, maker’s name, pseudo-hallmarks Negligible
Old Sheffield Plate Silver fused to a copper core (from 1743) No assay marks Negligible; value is as an antique

Old Sheffield Plate is its own category. The V&A says it dates from Thomas Boulsover’s discovery in 1743: bars of silver and copper fused under heat and pressure, then rolled into sheet. In the usual method the silver sheet was 1/40 the thickness of the copper block. Electroplating replaced it in the 1840s.


Quick tests resellers use, and their limits

None of these replaces the marks. Use them to rule a piece out, not to prove it is silver.

1. Read the marks (most reliable)

Look on the back of spoon and fork handles, the base of bowls and teapots, the inside of lids, and on chain clasps. Use a loupe. A full UK hallmark, or a clear 925 on a small item, is the strongest evidence you can get without a lab. EPNS, EP, A1 or the word “plate” ends the question.

2. The magnet test

UK silversmith Hersey & Son notes that real silver is not magnetic, and a piece that a magnet pulls strongly almost certainly contains a base metal. The limit: Cadmore Auctions warns not to trust a “non-magnetic” result, because the test only rules out common magnetic metals. Plenty of plate does not react.

3. Wear-through to base metal

Plate is only silver on the surface, so heavy use and polishing wear it away. Collectors report that copper or yellowish metal showing on high points and edges is a common sign of plate (thread). Solid silver is the same colour all the way through. The limit: a newer or lightly used plated piece may show no wear at all.

4. Weight

A heavy piece is not proof of silver. Collectors on r/Silverbugs looked at a heavy, unmarked teapot and called it plate, pointing to mould lines on the base that a silversmith would have ground smooth and rough solder joints (thread). On r/vintage, collectors note that large serving trays are very likely plate, and that a hallmark is struck into the metal, never a sticker (thread).

5. Tarnish

Tarnish does not separate the two. Plated items have a silver surface — The Silver Society puts it simply: they look like silver because the eye cannot see below the surface. A tarnished surface tells you there is silver on top, not how deep it goes.

6. Acid test kits

Kits with acid and a test stone are cheap, but The Silver Society warns that the fluid only tests the surface layer. On plate, the surface is silver, so a surface test can pass a plated piece.


Why plate has almost no resale or scrap value

Scrap value is about the silver content. For sterling, the silver weight is the item weight × 0.925. The scrap silver calculator works out the value from your scale reading.

For plate, the silver is a thin surface layer over a base-metal body, so almost all of the weight on the scales is copper alloy. Collectors are blunt about it: one r/Silverbugs reply calls EPNS plate with no silver value (thread). On r/vintage, collectors report that plated flatware has nominal value whether you sell it as a set or separately (thread).

This is why the plate-or-sterling question matters before you pay. A box of cutlery priced as “silver” is a good buy only if it carries hallmarks. If it says EPNS, price it as kitchenware.

One tip from the other side: collectors report that mixed “plate” job lots sometimes hide a hallmarked sterling piece, so check every item in the box (thread).


Plate that still sells

Low metal value does not mean unsellable. Plate sells on what it is, not what it weighs:

  • Old Sheffield Plate — it is an antique category in its own right; the V&A holds examples in its collection. Price it on comparable sold antiques, not on silver content.
  • Maker and pattern — collectors report that the value of plate depends on the maker (thread). Search sold listings by maker name and pattern before you price.
  • Replacement pieces — collectors suggest selling single pieces to people who need to complete a set (thread).

Whatever you sell, describe it honestly. The Act lets a trader use the word “silver” on a plated item only with “plated” next to it, and Trading Standards guidance says a plated description must be true (Business Companion).


When to get an assay or a professional opinion

Pay for an expert when the marks are worn, missing or suspicious and the piece could be worth real money if it is solid. Examples: a heavy unmarked bowl, a set of spoons with odd marks, or anything you plan to sell as silver.

  • Sheffield Assay Office — its Enquiry and Research Service can tell you whether an item is silver or electroplate and identify the maker of Sheffield-marked pieces. They quote a price after you submit the form.
  • Birmingham Assay Office — its analysts use X-ray fluorescence (XRF) to check metal content, and it offers valuations of silverware for insurance, probate and private sale.
  • A local jeweller or buyer — collectors report that shops that buy jewellery will often test a piece in front of you (thread). Get a second opinion before you sell to the same shop that tested it.

For pieces that already have marks, start with the free hallmark identifier. It takes you through standard mark, town mark and date letter, and will tell you quickly whether you are looking at a hallmark or a plate stamp.


Frequently asked questions

What does EPNS mean?

EPNS stands for Electro Plated Nickel Silver. It means a base-metal item with a thin layer of silver electroplated on top. Nickel silver is a copper, nickel and zinc alloy with no silver in it. EPNS is a maker’s stamp, not a hallmark, and the Birmingham Assay Office lists it as a sign of a silver-plated item rather than solid silver.

Is silver plated the same as sterling silver?

No. Sterling silver is solid silver of at least 925 parts per thousand all the way through. Silver plate is base metal with a thin silver coating. In the UK, a trader can only describe an item as silver if it is hallmarked or exempt; plated items must be described as plated.

What is the difference between sterling silver and silver plate?

Sterling is 92.5% silver through the whole piece and, in the UK, carries a hallmark with a sponsor’s mark, a fineness mark (925) and an assay office mark. Silver plate only has silver on the surface, carries maker’s stamps such as EPNS, EP or A1 instead of a hallmark, and has little or no scrap value.

How can I tell if my silverware is real silver?

Look for a UK hallmark first: a sponsor’s mark, a fineness mark such as 925 or a lion passant, and an assay office mark such as an anchor or castle. EPNS, EP, A1 or the word plate means plated. Then check worn edges for copper or yellow base metal showing through. A magnet that pulls strongly means base metal. If the piece is unmarked and matters, ask an assay office.

How can I tell if my silver chain is real?

Check the clasp and end links for a 925 stamp or a full UK hallmark. Silver items under 7.78 grams do not need a hallmark in the UK, so many light chains carry only 925 or nothing. A magnet that pulls strongly means base metal, but a chain that does not react is not proven silver. Look for colour change where the chain rubs, and ask a jeweller or assay office if the value justifies it.

Does a magnet test prove silver is real?

No. Silver is not magnetic, so a strong pull tells you the item contains base metal. But a piece that does not react can still be plate, because the test only rules out magnetic metals. Use it as a quick screen, then check the marks.

Is silver plate worth anything for scrap?

Very little. The silver is only a surface layer over base metal, so the weight on the scales is almost all copper alloy. Collectors report that EPNS has no meaningful silver value. Plate sells, if at all, on maker, pattern, condition and use, not on metal content.


About the author

I’m Oleksandr, the developer behind FlipperHelper. My wife resells finds from car boot sales. I built the free hallmark identifier The app tracks what you paid for every piece, so you know the real profit when it sells.

Know your profit on every silver find

A hallmarked spoon from a £1 box is a great find — but only if you remember what you paid, the pitch fee and the petrol. FlipperHelper logs each item with its cost when you buy it, so you see your real profit when it sells.

Download Free on the App StoreGet it Free on Google Play